Fix Google Chrome Site Cannot Be Reached Error Top 15 Solutions

Fix Google Chrome Site Cannot Be Reached Error Top 15 Solutions

Why do You see The Google Chrome Site Cannot Be Reached Not known Factual Statements?

We have become reliant on this web to such extent that even the slightest delay in search outcomes due to slow net connections makes us anxious, mainly when we see google chrome site cannot be reached mistake instead of the search results page. That’s so irritating. Isn’t it? We will discuss some methods by which you can avoid this chrome error.

In Google Chrome web browser is very typical. Many Chrome web browser users might be facing this error; however, they are unaware of how to fix this error. Numerous situations might trigger this error in Chrome internet browsers. 

So, what triggers the This Site Can’t Be Reached error in Chrome? Well, it can be anything associated to either your Google Chrome settings, DNS settings, or Network Adapter Driver. Your Google Chrome web browser has cookie corruption, or out of date settings, Your wireless network connection requires repair work, Your wireless adapters run out date, Your anti-viruses is blocking the site, Your DNS cache is void. Another factor might be the firewall avoiding Google Chrome to load the web page. While these are the most common reason for getting this website can’t be reached error, it may also take place for not getting the web connection or misconfigured web or network settings.

Likewise in those cases, you received the error, and it states Error code: DNS_PROBE_FINISHED_NXDOMAIN Or ERR_CONNECTION_TIMED_OUT 

Here are the 14 different solutions to the This Site Can’t Be Reached Error. Go through the below techniques that will help you to solve your google chrome site cannot be reached error. Sometimes the error might occur due to settings, thus resetting your web browser settings to default will resolve your problem. Follow the below-given actions to solve your This Website Can’t Be Reached error.

This website can’t be reached error message could happen on Windows 8, Windows 10, Linux, Chrome OS or Android devices.

But the question is how to solve it? How to repair it? Let us take a look at. Individuals likewise ask; Why do I keep getting ‘This site can not be reached’? Fixing this website can’t be reached err_connection_timed_out? How to repair declined connection? What does it suggest when a connection is refused? How to permit Chrome to access the network in my firewall software? And so on


Here are some possible solutions that take you to your preferred website in your Chrome browser.

  1. Clear internet browser cache, history and cookies
  2. Reset Chrome browser settings
  3. Reset Wi-Fi Modem
  4. Restart DNS client modification 
  5. Reset and Change IPv4 DNS Address
  6. Disable “Experimental QUIC protocol” flag
  7. Changing maximum allowed TLS version
  8. Reset the Chrome profile Sync
  9. Remove browser extension from Chrome
  10. Reset TCP/IP
  11. Scan your device for malware
  12. Reinstall Chrome
  13. Check Windows Time And Date
  14. Run Network Trouble Shooter Program
  15. Install another web browser


How To Solve This Site Can’t Be Reached Error. 

If you use Google Chrome that for sure you have to deal with the widely known error “This website can’t be reached”. It is quite irritating, and a lot of times you offer upon reaching your wanted site because Google keeps sending this mistake. Being a common issue that many users face, we wanted to examine more about it and what are the factors behind it and how to solve it.

30 Google Chrome Flags to Improve Chrome Browser Speed

Check Your Antivirus Settings

Make sure your antivirus does not obstruct the connection. Some antivirus programs, such as ESET NOD32 or Avast, have e-mail security and Web connections. Go to the anti-virus settings, find the SSL protocol protection option, and turn it off. In ESET, it is called “SSL/ TLS Filtering.” 

Clear Browser Cache, History And cookies

Remove your browsing data in Chrome by clicking on the 3 dots in the top right corner. And then click on the “More tools” option and after that Clear browsing history and cookies information. To clear whatever to select the “the start of time” option as the time setting and chooses what types of data you wish to delete.

Delete all cookies and close attention to the ones named NWOLB as users declare these triggered the most issues for them. Restart your computer system again and inspect if the problem is fixed. Having current network adapters is a must, and you should regularly ensure to do so to avoid any issues concerning your computer system.

It is possible that one or more cookies of the website that you are attempting to gain access to have been corrupted due to which this specific concern is being triggered on your computer. Therefore, after clearing out these cookies and then check to see if doing so fixes your problem before trying anything else.

  1. Open Chrome browser.
  2. At the top right, click More icon.
  3. Click “More tools” -> Clear browsing data .Choose The Start Of Time To clear everything
  4. Select a time range. To delete all your data select All time.
  5. Next to “Cookies and other site data” and “Cached images and files,” check the boxes.
  6. Click Clear data.

Run Network Trouble Shooter Program

Type into your computer system’s search bar through the start menu and open the run program module. Type into the Run program to open up the network connections box. Find your Wi-Fi connection in the network connections window, right-click it, and hit the Provide the network trouble shooter program some time to run.


Click on your  Wifi connection and select Diagnose


Let the Network Troubleshooter run and it will give you the following error message:

DHCP is not enabled for “Wireless Network Connection”


  • Click on “Try these Repairs as an Administrator“.
  • On the next prompt, click Apply this Fix.

If the above didn’t help then run Network Trouble shooter from Windows 10 Settings:

1. Press Windows Key + I to open Settings then click on Update & Security.

chrome error

2. From the left-hand menu select Troubleshoot.

3. Under Troubleshoot click on Internet Connections and then click Run the troubleshooter.

run the troubleshooter

I’m Feeling Curious Google Trick – No It Is Not Gone 2020 Fun Facts

Reset Internet Browser Settings

Internet browser like Chrome gives you the option to reset your browser settings in one click. Doing this will reset all configuration information from Chrome, such as your home page, tab settings, saved form information, browsing history, and cookies.

  1. Open Chrome browser.
  2. At the top right, click More icon.
  3. Select Settings from the menu.
  4. At the end of the page, click Advanced.
  5. Reset and clean up, click Reset Settings and then Reset Settings.

Click on three dots icon available at the top right corner.

Reset Internet Browser Settings chrome site cant not reach error

Click on the Settings button from the menu opens up.

Fix Google Chrome Site Cannot Be Reached Error chrome

Scroll down at the bottom of the Settings page and click Advanced.

Fix Google Chrome Site Cannot Be Reached Error chrome reset

As soon as you click on Advanced, from the left-hand side click on “Reset and clean up“.

Now under the Reset and clean up tab, click on Restore settings to their original defaults.

Fix Google Chrome Site Cannot Be Reached Error chrome reset 2

Below dialog box will open up which will give you all the details about what restoring Chrome settings will do.

Note: Before proceeding read the given information carefully as after that it may lead to loss of some important information or data.

Fix Google Chrome Site Cannot Be Reached Error 3

7. After making sure that you want to restore Chrome to its original settings, click on the Reset settings button.

Reset Wi-Fi Modem

Reset your wi-fi modem manually. If you have a separate router, you should reset it as well.

  • Remove the power cable from the WiFi router.
  • Press and hold the reset button ten to fifteen seconds.
  • Release the reset button after the lights on the modem start flickering.
  • You have to wait for 3 to 5 minutes for the Internet light to turn green or yellow based on different Wifi Modems models.
  • Now try to connect with the Internet.
  •  May be asked for account-related information to reset your modem.


Restart DNS client

In some unique cases, just particular websites are packed into failure, and that is when you require to carry out a standard level of troubleshooting to figure out the issue. If you can not open a specific website, start by clearing the DNS cache, then run a ping and trace against this site, and make sure that it is not a particular ISP problem.


  1. Click the Windows “Start” button and select “Run.”
  2. Enter “cmd” into the text box and press “Enter.”
  3. This starts your Windows command prompt.
  4. Type net stop dnscache to stop the service.
  5. It may take a few seconds for the DNS service to stop.
  6. Type net starts dnscache to the command prompt and “Enter.”
  7. This restarts the DNS service on the machine.
  8. To reset the DNS cache and remove all entries from it, run the following command: ipconfig /flushdns.
  9. If everything went well, the result should be “Successfully flushed the DNS Resolver Cache”

Flushing Old DNS

This would be a potential solution if you had changed the DNS sometimes earlier. In this case, remnants of the old DNS may stay in the computer cache. This cache content may cause conflicts with the new DNS, thus causing the “This Site Can’t Be Reached” error on Chrome. So, you can flush the old DNS to fix the issue.




Check Windows Time And Date

In many cases, the date and time settings are essential because they are utilized by the computer to check the credibility of a website or a server’s security certificate. If the date and time aren’t set effectively, the certificate can not be verified.

Windows DNS client is not working because of the misconfiguration of DNS address in network settings – google chrome site cannot be reached. However, this error “this site can’t be reached” is not just by DNS failure, but there are also lots of factors possible to trigger it. If your system clock isn’t set correctly, then you will face the mistake of “ERR_CONNECTION_TIMED_OUT” Always make sure you have proper windows time and date.

Change IPv4 DNS Address

  1. Open Control Panel.
  2. Click View network status and tasks.
  3. Click Change adapter settings on the left portion of the Window.
  4. Double-click the icon for the Internet connection you’re using.
  5. Click and highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.






  1. Enter the new DNS addresses
  2. Enter this Google public DNS server address:
    1. Prefered DNS Server:
    2. Alternate DNS Server:


Disable “Experimental QUIC protocol” flag

The concept of QUIC is to make transportation that would work better for the web than TCP. QUIC utilizes UDP port 80 and port 443 and typically permits clients to bypass transparent proxies, in which UTM function such as web filtering may not work effectively on Google Chrome only, but works perfectly on other internet browsers such as Web Explorer or Mozilla Firefox.

In some cases, due to the security perspective, QUIC (Quick UDP Internet Connection) does not enable access to specific web pages. So, this might be triggering the issue. However, you can solve this by disabling this QUIC procedure. First of all, go to your google chrome internet browser. Then Open chrome and type chrome:// flags/ in the address bar. Search the Speculative QUIC protocol. Modification “Default” to “Disabled” alternative from the drop-down menu. Restart Google Chrome for your modifications to work.

  1. Open Chrome and type chrome://flags/ in the address bar.
  2. Search the Experimental QUIC protocol.
  3. Change “Default” to “Disabled” option from the drop-down menu.
  4. Restart Google Chrome for your changes to take effect

In the next window proceed with caution and click on the “Reset all” button.

site can’t be reached error in Google Chrome flags

Changing maximum allowed TLS version

Another possible reason is that the TLS version running on the webserver is old. Transport Layer Security, short TLS, is a cryptographic protocol to communicate securely over a computer network. The current version of TLS is 1.2, while TLS 1.3 is available as a final version.

  1. Open Chrome and type chrome://flags/ in the address bar.
  2. Search Maximum TLS version enabled.
  3. Select the version 1.3, which is set to Default before.
  4. Restart Google Chrome for your changes to take effect.

Reset the Google Chrome Profile Sync

On your computer system, open Chrome. Go to the Google Dashboard – google chrome site cannot be reached. At the bottom, click Reset sync. Verify by clicking OK. Turn sync on once again. All Internet browsers allow for the usage of extensions, which are small programs that extend the performance of a web browser. Some web browser extensions are understood to interrupt network connections.

In some scenarios, your web browser maybe has gotten some incorrect setups due to which it might be unable to search through the web properly. Therefore, in this action, we will be resetting both the default internet explorer and the Google Chrome web browser back to their original defaults which ought to eliminate any incorrect configurations that the web browser may obtain.

Remove Browser Extension from Chrome

At the top right, click More icon. Select More tools from the menu. Select Extensions from the side menu. Drag the blue slider to disable the extension one by one. Verify if an internet browser extension is accountable for the specific mistake and eliminate it. 

  1. Open Chrome browser.
  2. At the top right, click More icon.
  3. Select More tools from the menu.
  4. Select Extensions from the side menu.
  5. Drag the blue slider to disable the extension one by one.
  6. Confirm if a browser extension is responsible for the particular error and remove it.

Resetting TCP/IP of the Computer

Type “cmd” in the search box, then right-click on command prompt to select “Run as Administrator”. Depending on your computer settings, you may be asked to provide an administrator password before you can continue.

Execute the following commands. That is, you have press Enter button after entering all the commands.

ipconfig /release

ipconfig /all

ipconfig /flushdns

ipconfig /renew

netsh int ip set dns

netshwinsock reset

Resetting TCP And IP of the Computer

At the command Prompt Type netsh int IP reset and then hit the Enter key on your keyboard.

  1. Wait for the Command Prompt to run through the TCP/IP reset.
  2. Reboot your computer and go to the website again to see if it works.


Reinstall Network Adapter Drivers

  1. Go to the icon of ‘My Computer’ and right-click to select Manage.
  2. There click on Device Manager that will bring you a list of all the hardware installed.
  3. Now look for the Network adapters and expand it.
  4. Right-click the network connection you are using and select Uninstall.
  5. Restart your PC, and the drivers will get installed automatically, then try the open website again.

Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

Network Drivers fix chrome site can not be reached error 4

Expand Network adapters then right-click on your WiFi adapter and select Uninstall.

Network Drivers fix chrome site can not be reached error 3

Again click Uninstall in order to confirm.

Network Drivers fix chrome site can not be reached error 2

 Device Manager menu, select Action then click on  Scan for hardware changes.

Network Drivers fix chrome site can not be reached error

 Reboot your PC and Windows will automatically install the default drivers.

Scan your device for Malware

The computer you’re using may be infected with malware which is interfering with your network connections. Some malware installs a proxy server to capture and redirect internet traffic through the malicious proxy server. These type of malware cause the “This site can’t be reached” error in Chrome browser.

Reinstall Chrome

In Control Panel pick to Uninstall a program and remove Google Chrome Clear Chrome Cache Data from C: \ Users \% your_name% \ AppData \ Local \ Google \ by deleting whatever in the folder Restart Windows Download the newest variation of Google Chrome and install it Open the Chrome Web Browser and see if it works Computer systems do sometimes get infections that make errors like this site can’t be reached to appear.

  1. Go to Control Panel and click Uninstall a program and uninstall Google Chrome from your PC.
  2. Navigate to C:\Users\%your_name%\AppData\Local\Google\ and delete everything inside this folder.
  3. Download the latest version of the Chrome Browser and install it.
  4. Restart your PC, and try the open website again.

Press Windows Key + I to open Settings then click on Apps.

Google Chrome Site Cannot Be Reached reinstall chrome

 From the left-hand menu, select Apps & features.

Now under the right-hand side pane, scroll down, and find Google Chrome.

Google Chrome Site Cannot Be Reached reinstall chrome 2

Click on Google Chrome then click on the Uninstall button.

Google Chrome Site Cannot Be Reached reinstall chrome 3

Again click on the Uninstall button to confirm Chrome uninstallation.

Again click on Uninstall button to confirm chrome uninstallation

Once Chrome uninstallation completes, reboot your PC to save changes.

Again download & install the latest version of Google Chrome.

Google Chrome Site Cannot Be Reached reinstall chrome

It can likewise be activated by a dead DNS server reaction or a firewall software obstructing the Google Chrome from locating the network. The majority of you have already attempted all the above steps it suggests having difficulty connecting to the server through its domain name.

[pii_email_37f47c404649338129d6] Email Error Fix

Leave a Reply

Your email address will not be published. Required fields are marked *